I'd guess you could make it work. Might take a little fabricating.
Possible Air Intake for the 2.0L 4WD
Just wondering if anyone has thought to put an air intake into the EcoSport from the Focus since they do share the same engine. From what I’ve seen the focus and the EcoSport could share an air intake from k&n but the only issue would be making sure the bolt holes are close or similar.
1 - 10 of 10 Posts
It’s the same motor just different vehicle so I thought about doing it to see if it worksI'd guess you could make it work. Might take a little fabricating.
Maybe call K&N. Tell them what you're trying to do and see if they'll let you return it if you can't make it work.It’s the same motor just different vehicle so I thought about doing it to see if it works
That’s a good ideaMaybe call K&N. Tell them what you're trying to do and see if they'll let you return it if you can't make it work.
should work, used the Fiesta kit on my 1.0 with little modificationIt’s the same motor just different vehicle so I thought about doing it to see if it works
I’m hoping it works but I’ll call k&n and askshould work, used the Fiesta kit on my 1.0 with little modification
Did you try it?
I just have the K&N panel filter. It's only been in there for a couple thousand miles, but it's definitely filtering and the top part of the airbox is clean as new. I get a little more intake noise, and it pulls well.
The intake draws cold air from in front of the car, so that's basically a CAI, anyway. It won't give the whoosh of the big filter, but it's something.
I just have the K&N panel filter. It's only been in there for a couple thousand miles, but it's definitely filtering and the top part of the airbox is clean as new. I get a little more intake noise, and it pulls well.
The intake draws cold air from in front of the car, so that's basically a CAI, anyway. It won't give the whoosh of the big filter, but it's something.
I haven’t had time to call and ask but I was going to because the car does need more air to get better gas mileage and powerDid you try it?
I just have the K&N panel filter. It's only been in there for a couple thousand miles, but it's definitely filtering and the top part of the airbox is clean as new. I get a little more intake noise, and it pulls well.
The intake draws cold air from in front of the car, so that's basically a CAI, anyway. It won't give the whoosh of the big filter, but it's something.
The’ll probably say it does not fit because you will need to block off the Map sensor (I uses JB Weld) and drill a hole for the AIT sensor. Everything else fits like a gloveI haven’t had time to call and ask but I was going to because the car does need more air to get better gas mileage and power
1 - 10 of 10 Posts
2018+ Ford EcoSport
A forum community dedicated to Ford EcoSport owners and enthusiasts. Come join the discussion about maintenance, servicing, troubleshooting, gas mileage, modifications, accessories and more!
Full Forum Listing
Top Contributors this Month
View All
XR650R
18 Replies
gladys.njogu254
7 Replies
Teslacoilin
6 Replies
Recommended Communities
