2018+ Ford EcoSport banner

Hood Struts

841 Views 6 Replies 3 Participants Last post by  mwittke5857
My wife has a 2020 Ecosport Titanium. Does anyone know of a quality made hood strut kit to fit this application?
1 - 7 of 7 Posts
I googled it and there are quite a few out there, as you surely know. No idea which are good and which are junk, though. 🤔
I found a lot listed, but nobody had a listing for the Ecosport
I've replaced enough struts to know. They all eventually wear out. When hood struts wear out, it's a PITA. Even IF you put struts on it, don't remove the old one. You may need it.
My wife has a 2020 Ecosport Titanium. Does anyone know of a quality made hood strut kit to fit this application?
I used the kit designed for the Focus through Steeda (Steeda Focus Hood Strut Kit (12-18) 555 0686) One hole lines up perfectly and is tapped (pass side) I ended up drilling 3 holes and using riv-nuts for the lower brackets
I used the kit designed for the Focus through Steeda (Steeda Focus Hood Strut Kit (12-18) 555 0686) One hole lines up perfectly and is tapped (pass side) I ended up drilling 3 holes and using riv-nuts for the lower brackets

Thank you for this info. I'll look into it.
Thank you for this info. I'll look into it.
FYI You will need to trim the little windshield wiper tray. I'll add a pic of mine (when it stops raining!)
  • Like
Reactions: 1
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top