2018+ Ford EcoSport banner

Hi Joe new member

980 Views 4 Replies 2 Participants Last post by  Jcjz565853
I just bought an 18 Ecosport Titanium.
When I turn on the car and put it in reverse. The green yellow and red guides are showing.
As I turn the steering wheel the guide lines to show the heading of the car don't show up.
When I drive and back up it works. Then when I turn it off and back on it doesn't work again.
Is anyone experiencing this issue as well?
How did you fix it?
1 - 5 of 5 Posts
e steering wheel the guide lines to show the heading of the car don't show up.
When I drive and back up it works. Then when I turn it off and back on it doesn't work again.
Is anyone experiencing
I am also having this issue. You might enter your VIN into your profile at Ford.com and see if there is an update for your SYNC software. If that doesn't work, there is an SSM out on it, I just have to look for it again.
  • Like
Reactions: 1
SSM 47526 - 2018 EcoSport - Parking Aid - Active Reverse Guideline Overlays Intermittently Not Present On Display When Reverse Gear Is Selected
Some 2018 EcoSport vehicles equipped with a rear parking aid camera may intermittently exhibit the active reverse guideline overlays not present on the front display interface module (FDIM) when reverse gear is selected. This may be due tothe steering straight ahead position not stored into the power steering controlmodule (PSCM). Reprogram the PSCM to GN15-14C217-AE or later using the latest version of the appropriate Ford scan tool. Operation of the active reverse guidelines would be restored after the vehicle is driven in a straight ahead directionwith minimal steering input/effort at a speed of over 40 mph (64 km/h). For claiming, use causal part 3C529 and applicable labor operations in Section 03 of the Service Labor Time Standards (SLTS) Manual.


Sounds like a trip to the dealer for an update is needed.
  • Like
Reactions: 1
I am also having this issue. You might enter your VIN into your profile at Ford.com and see if there is an update for your SYNC software. If that doesn't work, there is an SSM out on it, I just have to look for it again.
I spoke to Ford Service and she said that Ford is aware of it. Are currently working on a fix. There is a bug in the system
SSM 47526 - 2018 EcoSport - Parking Aid - Active Reverse Guideline Overlays Intermittently Not Present On Display When Reverse Gear Is Selected
Some 2018 EcoSport vehicles equipped with a rear parking aid camera may intermittently exhibit the active reverse guideline overlays not present on the front display interface module (FDIM) when reverse gear is selected. This may be due tothe steering straight ahead position not stored into the power steering controlmodule (PSCM). Reprogram the PSCM to GN15-14C217-AE or later using the latest version of the appropriate Ford scan tool. Operation of the active reverse guidelines would be restored after the vehicle is driven in a straight ahead directionwith minimal steering input/effort at a speed of over 40 mph (64 km/h). For claiming, use causal part 3C529 and applicable labor operations in Section 03 of the Service Labor Time Standards (SLTS) Manual.


Sounds like a trip to the dealer for an update is needed.
I spoke to Ford Service and she said that Ford is aware of it. Are currently working on a fix. There is a bug in the system
  • Like
Reactions: 1
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top