[calogero]

Looking for ForScan codes to disable Auto Start/Stop
Does anyone have a list of codes for 2018 Ecosport?

 

[Mizzou.Mike]

I have been searching the net for this as well with no luck

 

[workingclasshero]

It will be hard to find them right now with the EcoSport being so new. I'll keep a look out though here and other ES communities.

 

[Larry1013]

Wish someone would come up with some FORScan codes like the F150 and SuperDuty guys have. I would like to up the number of lane change flashes like my truck. I would like to go from 3 to 5 flashes. The F150/SD is in the SCCM but appears in a different line code for the ES.


Yes, I realize I am reviving a an old thread.

 

[Dencke1]

calogero - I just saw that there is a START / STOP ELIMINATOR device sold on 4D Tech website which you plug in (behind the diagnostic port) and which "remembers" your on/off setting for the Auto Start/Stop function. So with this device, you can turn off the function, and it will keep the function off (without you needing to disable it every time you restart the ignition). Cost is $99. Not as good a solution as a FORScan code, but it might work for you...

Here is the link (with "." replaced by "[dot]":
https://www[dot]4dtech[dot]com/start-stop-eliminator-ecosport/

 

[Larry1013]

AutoStop Elimator makes a similar product that lugs in between the switch and the harness. I just got one and installed it. The cost with a 10% discount code was $67.50 with free shipping. Can vouch it works as described and like the 4D Tech model does.


https://www.autostopeliminator.com/collections/ford/products/2018-ford-ecosport-autostop-eliminator


The discount code is AutoVlog


There is an installation video at this link...



https://www.autostopeliminator.com/...ostop-eliminator?variant=27651436478528#tab-2

 

[mwittke5857]

calogero - I just saw that there is a START / STOP ELIMINATOR device sold on 4D Tech website which you plug in (behind the diagnostic port) and which "remembers" your on/off setting for the Auto Start/Stop function. So with this device, you can turn off the function, and it will keep the function off (without you needing to disable it every time you restart the ignition). Cost is $99. Not as good a solution as a FORScan code, but it might work for you...

Here is the link (with "." replaced by "[dot]":
https://www[dot]4dtech[dot]com/start-stop-eliminator-ecosport/

Or you could just unplug the pigtail that's on the neg (-) battery terminal