2018+ Ford EcoSport banner

Ecosport 2019 Blindspot/Cross Traffic

3592 Views 1 Reply 2 Participants Last post by  Larry1013
ello,

My car is Titanium without blind spot and cross traffic, i bought 2 used blind spot modules and mirrors after installing, they didn’t work and these errors appear:

SODR U3002:62-AB - Vehicle Identification Number
SODR B11D6:15-AB Driver display alert LED
SODL U3002:62-AB - Vehicle Identification Number
SODL B11D6:15-AB Driver display alert LED

i corrected VIN number in both modules and this error disappeared U3002:62-AB from both.

i added the as build data from another car to IPC, after enabling the blind spot & cross traffic on IPC, i've the following errors:

IPC U0533:56-08 Code: U0533 - Invalid Data Received From Side Obstacle Detection Control Module A
IPC U0534:56-08 Code: U0533 - Invalid Data Received From Side Obstacle Detection Control Module B

in PDM/DDM i changed the following and now when i start the car both mirrors Blindspot light open for 5 seconds and then turn off:

740-04-01 AA00 0019 0F to be AE00 0019 0F

741-04-01 A200 0019 08 to be A600 0019 08

still also having this error:

B11D6:15-AB Driver display alert LED

any solution?
See less See more
1 - 2 of 2 Posts
No idea. I know my AB data doesn't have a 740 nor 741 section. I assume the PDM does not need programming if replaced.


How do the rest of the 740 and 741 parameters compare between your original and the donor AB? It would be nice to have one of the Ford Workshop DVD's as it would give you the DTC's and possible err fixes.



Would love to find the part of the SCCM to up the number of lane change blinks from 3 to 5 or 6 line I have done with 2015 F350 SD truck.


Good luck to you.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top